Certificate IV in Rail Signalling

  • HRD CBI
  • HRD relay and geographic interlocking
  • HRD rail signal training
  • HRD points

 Quick Course info

Pre-requisites

Learners MUST hold the UEE30811 qualification or its equivalent before the Certificate IV can be issued.

In addition, HRD requires that learners undertaking the UEE41211 Certificate IV in Electrical - Rail Signalling are currently employed in rail signalling (either as an apprentice or as a trainee).

  • Apprentices will be completing the UEE30811 Certificate III in Electrotechnology (Electrician) electrical trade qualification and typically begin undertaking the rail signalling qualification on finishing the first year of their apprenticeship.
  • Trainees are already qualified as electricians and enter directly into UEE41211 training with HRD Integrated Services.

Existing employment in rail signalling ensures that participants have access to essential infrastructure.

Duration

Training is typically delivered in 5 day blocks, 4-6 weeks apart.

An apprentice can complete the UEE41211 qualification in 3-5 years.

Trainees can expect to complete the qualification in 2 years.

Course duration includes workplace practical assessments that occur over the final 3 months of the course.

Assessment

A typical technical training module is assessed by a research assignment, written theory test and at least two workplace practical assessments.

RPL

Recognition of Prior Learning is available.

Evidence portfolio must be supported by a practical demonstration of knowledge and skills.

Award

The Certificate IV in Electrical - Rail Signalling is a nationally recognised qualification.

Cost

Because learners must already be employed in a rail signalling role, it's expected that your employer will meet all course costs.

Subsidised training is not available.

Contact us

Your Name (required)

Your Email (required)

Subject

Your Message

To enrol in the Certificate IV in Electrical - Rail Signalling you must already be employed by a rail operator or a rail infrastructure contractor in a rail signalling role (ie as a trainee or an apprentice).

Access to rail network signalling equipment and infrastructure is essential to be able to:

  • apply and consolidate knowledge and skills learned
  • undertake workplace practical assessment.

HRD provides the training, but not the full range of equipment you work on.

HRD does not provide information about employment opportunities or job vacancies.

Contact rail operators or construction contractors directly about employment in rail signalling.

Rail Signal Technician Training

HRD Integrated Services offers training leading to the Certificate IV in Electrical – Rail Signalling (UEE41211)

UEE41211 Certificate IV in Electrical — Rail Signalling

The UEE41211 Certificate IV in Electrical — Rail Signalling is the essential qualification for those wishing to work as a rail signalling technician or maintainer on the Australian rail network.

HRD offers training appropriate to each state rail network. Apprentices and electricians working with construction and testing companies can use this qualification as a basis for gaining employment as a rail signal installer or maintainer in another state or territory.

Successful completion of the UEE30811 Certificate III Electrotechnology (Electrician) (or equivalent), with rail signalling electives, is an essential pre-requisite to completing the Certificate IV in Electrical – Rail Signalling.

About Course delivery

On commencing the Certificate IV, participants undertake four pre-requisite industry specialisation units from the Certificate III in Electrotechnology (Electrician).

Industry speciaisation units

Commonly referred to as "the wiring units", the following four units are delivered as part of an introduction to rail signalling systems.

  • UEENEEN102A Assemble and wire internal electrical signalling equipment
  • UEENEEN103A Install and maintain rail track circuit leads and bonds
  • UEENEEN104A Test copper rail signalling cables
  • UEENEEN121A Repair rail signalling power and control cables

Core units

Three generic core units are integrated into delivery of technical units.

  • UEENEEE038B Participate in development and follow a personal competency development plan
  • NEENEEE117A Implement and monitor energy sector OHS policies and procedures
  • UEENEEK145A Implement and monitor energy sector environmental policies and procedures

The followiing units form the technical core of the Certificate IV qualification.

  • UEENEEN105A Install and maintain rail signalling power supplies
  • UEENEEN107A Install and maintain active level crossing equipment
  • UEENEEN108A Install and maintain power operated point actuating devices
  • UEENEEN109A Install and maintain train detection equipment
  • UEENEEN111A Install and maintain trackside signal and train protection equipment
  • UEENEEN112A Install and maintain vital relay interlocking systems
  • UEENEEN118A Find and repair rail signalling system faults

Rail signalling electives

HRD recommends that the following units of competency are undertaken to complete qualification requirements:
  • UEENEEN110A Install and maintain non-vital telemetry systems
  • UEENEEN114A Install and maintain computer-based interlocking rail systems

Additional electives

Employers may find it beneifical to have learners complete the following additional elective units:
  • UEENEED102A Assemble, set up and test computing devices
  • UEENEED143A Install and configure a client computer operating system and software
  • UEENEED146A Set up and configure basic local area network

Full details of the Certificate IV in Electrical – Rail Signalling can be found at the training.gov.au website.

Training for apprentices

Training is offered to apprentices when the first six months of the first year Certificate III Electrotechnology (Electrician) studies at TAFE have been completed.

Training for the Certificate IV occurs concurrently with the apprentice's electrical trade training and generally concludes at the end of an apprentice's fourth year.

Training for qualified electricians

A fast track program is available for trainees who currently hold the Certificate III Electrotechnology (Electrician) or equivalent ('A Class' licence).

Pre-requisite qualification requirements

It's important to be aware that evidence of a valid electrical trade qualification is an essential requirement of Certificate IV training. The UEE41211 qualification cannot be issued without either a current 'A Class' electical licence (or interstate equivalent) or a Certificate III in Electrotechnology (Electrician) or equivalent.

Refer to the Trade qualifications as RPL evidence page for more information or contact HRD for further advice.

Course duration

UEE41211 Certificate IV training is typically offered as HRD training modules in 5 day block release, 4-6 weeks apart. Training modules are delivered to build learner knowledge and skills sequentially.

Participants in the apprentice program can expect to complete their training in a maximum of 4 years, including a 3 month period of workplace practice and workplace practical assessment.

Qualified electricians in the trainee program typically complete their training and assessment in 2 years and 3 months.

Assessment

Learners typically complete a research assignment, theory test and a number of workplace practical assessments for each training module undertaken.

Theory work requirements must be met before undertaking workplace practical assessment.

A minimum 70% pass mark applies to most assessment tasks. Mandatory safety-critical requirements must be met as a part of demonstrating competence.

Course availability

The Certificate IV in Electrical – Rail Signalling course is offered on a needs basis so start dates and group sizes vary according to industry demand.

Training is provided at the Rail Skills Centre Victoria, Newport or at an interstate site that provides access to essential infrastructure.